2025 SANDVIK D75KX

Increase Machine Availability

• Enhanced control system features reduce troubleshooting time and increase availability for an improved operator experience.

Operator Assist Features

• Operator assist features drive increased productivity, enhanced accuracy, improved safety and reduced fatigue.

Advanced Features

• Advanced features work together to optimize operator performance, reducing cost and maximizing productivity.

Improved Visibility

• Swivel-enabled operator seat with integrated electro-hydraulic controls simplifies operation and visibility of the operating environment. The oversized driller’s window provides a clear view of the drill table during operation and greater visibility during tramming.

Swift Mast Change-outs

• The bolt-on mast locks eliminate cutting and welding to make mast change-outs easier to manage.
• Similar models may be shown in addition to the featured model. Equipment may be shown with options.

General

• Year: 2025
• Manufacturer: SANDVIK
• Model: D75KX
• Condition: New

Other

• Performance Hole Diameter: 229 - 279 mm | 9 - 11 in.
• Performance First Pass Hole Depth (Std. Mast): 10.2 m | 33'
• Performance First Pass Hole Depth (Ext. Mast):
• Performance Max. Hole Depth (Std. Mast): 52.5 m | 172' 4"
• Performance Max. Hole Depth (Ext. Mast):
• Performance Drill Pipe: 10.7 m | 35'
• Performance Maximum Pulldown: 334 kN | 75,000 lbf.
• Performance Maximum Bit Load: 409 kN | 92,000 lbf.
• Performance Hoist Rate: 0 - 27 m/min | 0-89 fpm
• Power Group Engine: CAT C27 T3/T4
• Power Group Rated Horsepower: 652 kW | 875 hp
• Power Group Full Load Rpm: 1,800 RPM
• Power Group Standard Ambient Range: -40° C to 50° C | -40° F to 122° F
• Power Group Fuel Tank: 2,274 L | 600 gal
• Power Group High Pressure: 41.0 m³/min | 1,450 scfm
• Power Group DTH: 24.1 bar | 350 psi
• Power Group Low Pressure (std): 56.6 m³/min | 2,000 scfm
• Power Group Rotary: 6.9 bar | 100 psi
• Power Group Compressor Options:
• Power Group High Pressure (Non Tier 4):
• Power Group High Pressure (Tier 4):
• Power Group Rotary Drilling:
• Power Group Advanced Compressor Control:
• Power Group DTH Drilling:
• Hydraulic System Reservoir Capacity: 872 l | 230 gal.
• Hydraulic System Reservoir Pressure: 0.345 bar air | 5 psi air, filtered breather
• Frame And Integral Jacks Main Frame: CAD/FEA designed, wide flange beam main rails w/ heavy cross bracing reinforced at high-stress areas
• Frame And Integral Jacks Walkways: Open grip strut, from cab to right deck & front to service cooler and air cleaners. Left side to service compressor receiver tank & dust control systems. Complete w/ handrails, kickplates & access ladders.
• Frame And Integral Jacks Lifting Hooks: Welded, 2 front, 2 rear
• Frame And Integral Jacks Leveling Jacks: 3 standard
• Frame And Integral Jacks Pad Diameter: 762 mm | 30"
• Frame And Integral Jacks Pad To Ground Clearance (retracted): 533 mm | 21 in on rear 533 mm | 21 in on front
• Undercarriage Model: Sandvik S35HD
• Undercarriage Track Shoe Width: 850 mm | 33.5 in
• Undercarriage Track Shoe Type: Triple grouser
• Undercarriage Width Over Tracks: 4,260 mm | 14'
• Undercarriage Track Length:
• Undercarriage Tram Speed: 2.3 kmph | 1.4 mph
• Feed Feed Type: Hydraulic cylinder and chain
• Feed Chain Type:
• Feed Rated Pull Down Force:
• Feed Feed Speed:
• Feed Feed Down Rate:
• Feed Rated Pull Back Force:
• Feed Feed Up Rate:
• Feed Chain Adjustment: Hydraulic jack with pins & grease cylinder
• Mast Construction: Rectangular tubing, welded w/beveled toe joints and recessed side members, and reinforcing in high stress areas. CAD designed.
• Mast Pivot Bushings: Replaceable alloy aluminum bronze
• Mast Hydraulic Lines: Pressure rated steel hydraulic tubing.
• Mast Mast Raising Cylinders: Two
• Mast Angle Drilling: 0° to 30° in 5° increments
• Mast Mast Locking:
• Mast Hoist:
• Mast Pipe Loader:
• Mast Pipe Size:
• Mast Pipe Length:
• Mast Lubrication: Lubrication system for pulldown chains
• Rotary Head (Twospeed) Model:
• Rotary Head (Twospeed) Rotary Power: 103 kW | 140 HP
• Rotary Head (Twospeed) Standard Rotary Speed/torque: 0-94 rpm: 13,287 Nm | 9,800 ft.lb 0-144 rpm: 8,637Nm | 6,370 ft.lb
• Rotary Head (Twospeed) Bullshaft Thread: 5.5 in API REGULAR
• Operator’S Cab Certification: FOPS as per ISO 3449 Level II
• Operator’S Cab Sound Level: 80 dB(A) or less
• Operator’S Cab Operator's Seat: Fully adjustable and swiveling with lap seat belt.
• Operator’S Cab Helper's Seat: Fixed
• Operator’S Cab Camera Display:
• Operator’S Cab HVAC System:
• Operator’S Cab Cabin Filtration:
• Operator’S Cab Sunshades:
• Operator’S Cab AM/FM Radio:
• Operator’S Controls Location:
• Operator’S Controls GUI:
• Dust Suppression Dust Collector: 198 m3/min | 7,000 cfm
• Dust Suppression Water Injection (w/ DC):
• Dust Suppression Water Injection (w/o DC):
• Dust Suppression Water Injection (w/ Or W/o DC): 2,271 l | 600 gal
• Dust Suppression Water Pump:
• Dust Suppression Dust Hood:
• Standard Features Lighting:
• Standard Features Chain Lubrication:
• Standard Features Central Grease Lubrication:
• Standard Features Thread Lubrication:
• Standard Features Cameras:
• Standard Features Safety Features:
• Standard Features Fluid Service Center:
• Standard Features Remote Drain Points:
• Standard Features Strobe Lights:
• Standard Features Oil Sampling:
• Standard Features Diagnostics Package:
• Options Autoleveling:
• Options RemoteTram:
• Options Radio Remote:
• Options Mast Access:
• Options Wash Down:
• Options Air Hose Reel:
• Options Hammer Lube / Bit Lube:
• Options Deck Crane:
• Options Fire Suppression:
• Options Additional Cameras:
• Options Auxilliary Fuel Tank:
• Options Central Lube:
• Arctic Package Genset:
• Arctic Package Electric Heaters:
• Arctic Package Fuel Fire Heaters:
• Arctic Package Insulation Wrap:
• Arctic Package Water Purging:
• Arctic Package Water Tank Heaters:
• Arctic Package Cold Weather Group:
• Arctic Package Electrical Supply To Heaters:
• Technology Features Performance :
• Technology Features Navigation:
• Technology Features Automine® Readiness Package:
• Technology Features Connectivity:
• Technology Features ILink Interface:
• Technology Features Digital Solutions:
• Dimensions Length Mast Up:
• Dimensions Length Mast Down: 16.16 m | 53’
• Dimensions Length Mast Down (std. Mast):
• Dimensions Length Mast Down (sext Mast):
• Dimensions Height Mast Down:
• Dimensions Mast Down Height W/ Work Deck: 7.13 m | 23’ 5”
• Dimensions Height Mast Up: 16.52 m | 54’ 3”
• Dimensions Height Mast Up (std. Mast):
• Dimensions Height Mast Up (ext. Mast):
• Dimensions Width:
• Dimensions Width W/ Dust Collector: 6.46 m | 21’ 2”
• Dimensions Width W/o Dust Collector:
• Dimensions Mast Up Length W/ GENSET: 14.34 m | 47’ 1”
• Dimensions Mast Up Length W/o GENSET: 12.69 m | 41’ 8”
• Dimensions Estimated Operating Weight: 68,000 kg | 150,000 lb