2026 TAKEUCHI TL10V2
additional information
- Excels at load and carry applications
- Greater rated operating capacity (ROC)
- Higher hinge pin height and full dump reach
- Increases strength and rigidity while protecting vital engine and hydraulic components
- Model specific undercarriage components with larger bearings result in slower shaft speed extending the life of the components
- Features double and triple flange track rollers that maintain at least two points of contact at all times making the machine less susceptible to detracking
- Quiet ride track design greatly reduces noise and vibration improving ride quality
- Tilt up operator station, heavy duty rear door and large lockable service hoods provide easy access to daily maintenance and service points
- Large side by side cooling module swings out to easily clean both sides of the radiator keeping the hydraulic system running cool and efficiently
- The 5.7" multifunction color display provides machine health and vitals while also allowing the operator to control a multitude of machine features and functions
- Rear view camera adds peace of mind with real time view of the rear of the machine
- Deluxe high back adjustable suspension reduces operator fatigue while providing greater visibility to the work equipment
- Pressurized cab helps cut down on debris inside cabin improving air quality
- Roll up door allows the machine to operate with the door open or closed regardless of loader arm position
- 2 Year Standard service
- Minimize Downtime
- Remote Diagnostics
- Utilization Tracking
- Proactive Maintenance
- Control Costs
- Geofencing
- EPA Final Tier 4 Emission Compliant
- Turbocharged
- High Pressure Common Rail Injection System
- DOC+DPF Exhaust After Treatment
- Automatic Fuel Bleed System
- Active Power Control Power Management System
- Working Modes - Power and ECO
- Dual Element Air Filter
- Dial and Foot Throttle
- High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
- Sealed Rocker Switches
- 12 volt System with 60 amp Alternator
- LED Work Lights: Two Front and Two Rear
- Engine Preheat
- Hour Meter
- Back-up Alarm
- Double Planetary Reduction Drives
- Permanently Sealed Track Rollers with Metal Face Seals
- Fully Welded Frame with Integrated Cross Members
- Two-Speed Travel
- 15.7" Rubber Track
- Grease Type Track Adjuster
- Front and Rear Tie-Down Points and Lift Points
- Rear Bumper Integrated into Frame
- 5.7" Color Multi-Informational Display with Rear Camera
- Tilt-up Operator's Station
- Deluxe High Back Suspension Seat
- Rear Pivoting Lap Bar with Arm Rest
- ROPS / FOPS Structure
- Retractable 2" Seat Belt
- Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (optional)
- Retractable 3" Seat Belt (optional)
- 3 Point Retractable Seat Belt (optional)
- Polycarbonate Door and Level 2 Guard (High Flow Only)
- Vertical Lift Design
- Pilot Hydraulic Controls
- Boom Float with Detent
- Cushioned Boom Cylinders
- Hydraulic Self Leveling
- Proportional Auxiliary Hydraulic Controls with Detent
- Pressure Relieving Flat Faced Coupler Body
- 14-Pin Connector with Push Button Control
- High Capacity Steel Hydraulic Tank
- Mechanical Quick Coupler
- Hydraulic Quick Coupler Cab - Standard Equipment
- Hydraulic Quick Coupler Canopy - optional
- Primary Flow Auxiliary Hydraulics 18.8 gpm
- High Flow Auxiliary Hydraulics 32.8 gpm (optional)
- Secondary Auxiliary Hydraulics 18.8 gpm (optional)
- Ride Control (optional)
- Pattern Change Valve (ISO or H) (optional)
- Similar models may be shown in addition to the featured model. Equipment may be shown with options.
- Year: 2026
- Manufacturer: TAKEUCHI
- Model: TL10V2
- Condition: New
- ROPS Type: Enclosed
- Operating Performance Operating Weight Canopy: 9,950 lb (4,515 kg)
- Operating Performance Operating Weight Cab: 10,270 lb (4,660 kg)
- Operating Performance Tipping Load: 7,205 lb (3,268 kg)
- Operating Performance Rated Operating Capacity, SAE J818*:
- Operating Performance Rated Operating Capacity (ISO 14397 1) @ 35%*: 2,522 lb (1,144 kg)
- Operating Performance Operating Capacity W/ Opt Counterweight: 2,718 lb (1,233 kg)
- Operating Performance ROC W/ Optional Counter Weight:
- Operating Performance Operating Load At 50% Of Tipping Load: 3,600 lb (1,633 kg)
- Operating Performance Bucket Breakout Force: 6,520 lb (2,957 kg)
- Operating Performance Lift Arm Breakout Force: 5,400 lb (2,450 kg)
- Operating Performance Traction Force: 9,730 lb (4,413 kg)
- Operating Performance Ground Pressure 15.7 In. Track:
- Operating Performance Ground Pressure 12.6 In. Track:
- Operating Performance Ground Pressure Canopy: 4.9 psi (34.3 kPa)
- Operating Performance Ground Pressure Cab: 5.1 psi (35.4 kPa)
- Operating Performance Ground Pressure:
- Operating Performance Travel Speed Low: 4.8 mph (7.7 km/hr)
- Operating Performance Travel Speed High: 7.0 mph (11.3 km/hr)
- Operating Performance NOTE: *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
- Hydraulic System Auxiliary Flow Primary Circuit: 18.8 gpm (71.2 Lpm)
- Hydraulic System Auxiliary Flow High Flow (optional): 32.8 gpm (124.0 Lpm)
- Hydraulic System Auxiliary Flow Secondary Circuit (optional):
- Hydraulic System Hydraulic System Pressure: 3,481 psi (21.0 MPa)
- Engine Make / Model: Kubota / V3307CR-TE4B
- Engine Engine Displacement: 203 cu in (3.3 L)
- Engine Horsepower @ 2,700 Rpm:
- Engine Horsepower @ 2,600 Rpm: 74.3 hp (55.4 kW)
- Engine Horsepower @ 2,400 Rpm:
- Engine Maximum Torque @ 1,500 Rpm: 195 ft-lb (265.0 Nm)
- Fluid Capacities Engine Lubrication: 11.8 qt (11.2 L)
- Fluid Capacities Cooling System: 15.9 qt (15.0 L)
- Fluid Capacities Diesel Exhaust Fluid (DEF):
- Fluid Capacities Fuel Tank Capacity: 21.5 gal (81.0 L)
- Fluid Capacities Fuel Consumption (65% Of Full Load): 2.7 gpm (10.3 L /hr)
- Fluid Capacities Hydraulic Reservoir Capacity: 9.5 gal (36.0 L)
- Fluid Capacities Hydraulic System Capacity: 17.2 gal (65.0 L)
- Machine Dimensions Max. Lift Height To Bucket Pin: 10 ft 4.8 in (3,169 mm)
- Machine Dimensions Mid Height Reach:
- Machine Dimensions Overall Operating Height:
- Machine Dimensions Dump Height Fully Raised: 7 ft 11.9 in (2,435 mm)
- Machine Dimensions Max. Mid Height Reach:
- Machine Dimensions Dump Reach Fully Raised: 3 ft 1.4 in (950 mm)
- Machine Dimensions Dump Angle: 40°
- Machine Dimensions Rollback Angle: 30°
- Machine Dimensions Track Ground Contact Length: 4 ft 7.9 in (1,419 mm)
- Machine Dimensions Machine Length: 9 ft 7.2 in (2,925 mm)
- Machine Dimensions Transport Length: 12 ft 1.0 in (3,680 mm)
- Machine Dimensions Transport Height: 7 ft 5.4 in (2,270 mm)
- Machine Dimensions Departure Angle: 30°
- Machine Dimensions Clearance Circle With Bucket: 7 ft 8.5 in (2,350 mm)
- Machine Dimensions Clearance Circle Without Bucket: 5 ft 0 in (1,535 mm)
- Machine Dimensions Clearance Circle Rear: 5 ft 5.2 in (1,655 mm)
- Machine Dimensions Track Width: 15.7 in (400 mm)
- Machine Dimensions Ground Clearance: 12.6 in (320 mm)
- Machine Dimensions Overall Width Without Bucket: 5 ft 8.5 in (1,740 mm)