2026 SANDVIK RANGER DX1010I
additional information
- Ranger™ DX1010i long-feed system enables up to 6.4 meters of single-pass drilling, reducing rod handling requirements and supporting more continuous drilling with fewer interruptions.
- The 290-degree rotating superstructure provides extensive drilling coverage of 55 m², enabling more holes to be drilled from a single setup and supporting efficient drilling cycles.
- The RD930 rock drill combined with the dedicated CT55 and CT67 rock tools delivers optimized shock waves for higher penetration rates, longer tool life and lower fuel consumption.
- Specifications and data shown are subject to change with or without prior notice.
- Year: 2026
- Manufacturer: SANDVIK
- Model: RANGER DX1010I
- Condition: New
- TECHNICAL DATA Hole Diameter: 89.0 - 140.0 mm (3.5 - 5.5 in.)
- TECHNICAL DATA Rock Drill: 30 kW
- TECHNICAL DATA Flushing Air Capacity: 11 m³/min up to 10 bar
- TECHNICAL DATA Drill Rod/tube Diameter: 51 and 60 mm (2 and 2 ⅜ in.)
- TECHNICAL DATA Hydraulic Rock Drill: RD930C (30kW)
- TECHNICAL DATA Engine: Volvo TAD882VE (EU Stage V, T4F) Volvo TAD852VE (T3)
- TECHNICAL DATA Cabin: iCab
- TECHNICAL DATA Transport Length: 14.3 m (46.9 ft)
- TECHNICAL DATA Transport Width: 2.45 m (8.00 ft)
- TECHNICAL DATA Transport Height: 3.3 m (10.8 ft)
- TECHNICAL DATA Weight: 20,100 kg (44,310 lb)
- HYDRAULIC ROCK DRILL Rock Drill: RD930C
- HYDRAULIC ROCK DRILL Rock Tools: CT55, GT60, CT67
- HYDRAULIC ROCK DRILL Operating Pressure: 100-240 bar
- HYDRAULIC ROCK DRILL Percussion Rate: 45Hz
- HYDRAULIC ROCK DRILL Percussion Output Power: 30kW
- HYDRAULIC ROCK DRILL Maximum Rotation Torque: 1750 Nm
- HYDRAULIC ROCK DRILL Shank Lubrication: Air/oil mist
- HYDRAULIC ROCK DRILL Flushing: Air
- HYDRAULIC ROCK DRILL Weight: 345 kg
- FEED Feed Type: CylF 22 feed, CylF 18 (option)
- FEED Total Length: 9 696 mm, 8 410mm (option)
- FEED Max. Length Of Starter Rod: 6 705 mm (22’), 5 485 mm (18’) (option)
- FEED Hole Depth With Starter Rod: 6 400 mm, 5 090 mm (option)
- FEED Hole Depth With Second Rod: 11880 mm
- FEED Hole Depth With Single Pass: 6400 mm
- FEED Single Pass Drill Steel: 5485 mm + 1220 mm
- FEED Hose Reel: Standard
- FEED Feed Extension Travel: 1300 mm
- FEED Feed/pull Out Force: 28 kN
- FEED Feed Swing: -45°/+45°
- FEED Feed Tilt: 135°
- ROD CHANGER Rod Changer Type: RC1418
- ROD CHANGER Storage Capacity: 5+1 (CT55), 4+1 (CT67, GT60)
- ROD CHANGER Rod Length: 5485 mm
- ROD CHANGER Max. Hole Depth: 33.7 m (CT55 1x22' + 5x18'), 28.2m (CT67 1x22' + 4x18')
- BOOM Boom Type: DB5200, articulated
- BOOM Boom Extension: 5,2 m
- BOOM Boom Swing:
- BOOM Drilling Coverage: 55m² 290°
- BOOM Collaring Height: +2.2 m/-4.9 m
- BOOM Horizontal Holes:
- CABIN Cabin Type: iCab
- CABIN Certificates: F.O.P.S. and R.O.P.S.
- CABIN Noise Level In The Cabin: below 75 dB(A)
- CABIN Air Conditioning: Intelligent air condition safety + (A/C system contains fluorinated greenhouse gases HFC -134a)
- CABIN Pressurization: Standard
- CABIN Seat: Multiposition
- CABIN Vibration Dampening: Standard
- CABIN Windows: Safety laminated, tinted, with wipers
- CABIN Power Take Off: 12 VDC
- POWERPACK Engine Type: Volvo TAD852VE
- POWERPACK DEF Tank:
- POWERPACK Number Of Cylinders: 6
- POWERPACK Engine Output: 210kW / 1 800 rpm
- POWERPACK Transmission Type: Gear box
- POWERPACK Screw Compressor Type: Enduro 25
- POWERPACK Air Filters: 2 pcs., with ejector and safety element
- POWERPACK Fuel Tank: 400 l
- HYDRAULIC SYSTEM Number Of Gear Pumps: 2 pcs. for cooling
- HYDRAULIC SYSTEM Number Of Piston Pumps: 3 pcs. for drilling, tramming, boom and rodhandling, dust collector
- HYDRAULIC SYSTEM Filtration Rate: 10 micron abs., return 25 micron, pressure
- HYDRAULIC SYSTEM Cooling Capacity: up to +50°C ambient
- HYDRAULIC SYSTEM Hydraulic Oil Tank: 300 l
- HYDRAULIC SYSTEM Shank Lubrication Device: SLU 22-1 CSL
- CONTROL SYSTEM Control System Type: Sandvik SICA, PLC controlled proportional electro-hydraulics
- CONTROL SYSTEM Tramming/boom/drilling Control: PLC controlled
- CONTROL SYSTEM User Interface: Electro-proportional joysticks and touchscreen
- CONTROL SYSTEM Control System Diagnostics: Graphical flow chart type
- CONTROL SYSTEM Drilling Control System Type: iTorque
- CONTROL SYSTEM Antijamming System: For rotation and flushing
- CONTROL SYSTEM Collaring Control: Automatic
- CONTROL SYSTEM Preset Drilling Parameters: Adjustable for fine tuning for different rock conditions
- CONTROL SYSTEM Voltage: 24 VDC
- DUST COLLECTOR Dust Collector Type: DC 900H
- DUST COLLECTOR Capacity/vacuum: 23 m³/min at 1 000 mm vacuum H2O
- DUST COLLECTOR Filter Elements/material: 15 pcs/fiber
- DUST COLLECTOR Total Filter Surface: 12 m²
- DUST COLLECTOR Primary Cyclone: Standard
- DUST COLLECTOR Movable Suction Head: Standard
- CARRIER Track Type: FL 6
- CARRIER Grouser Plate Width: 310 mm
- CARRIER Ground Contact Length: 2 750 mm
- CARRIER Ground Pressure: 1.0 kg/cm²
- CARRIER Ground Clearance: 400 mm
- CARRIER Turnable Superstructure: CCW180°+CW110°
- CARRIER Oscillation Angles: +/- 10°
- CARRIER Tramming Force: 156 KN
- CARRIER Max. Tramming Speed: 3.2 km/h
Recommended for you
