2026 TAKEUCHI TL11R3

Radial Lift Loader Design

• Electric over hydraulic (EH) controls
• Delivers superior breakout forces
• Well suited for grading and dirt work

All Steel Construction

• One-piece, purpose-built, fully welded frame
• Heavy-duty cross members for a reinforced structure
• 12.4-inches of ground clearance

Heavy Duty Undercarriage

• Double and triple flanged track rollers
• Reduced risk of de-tracking with greater stability
• Full welded frame with integrated cross members

Ease Of Maintenance

• Tilt up operator station for service access
• Lockable service hood, steel rear door, and integrated bumper
• Swing-out cooling module for easy cleaning

Deluxe Operator Station

• Six-way adjustable high-back suspension seat
• 8-inch touch screen display
• Sloped rear deck and large window for visibility
• Overhead roll-up door

Engine

• EU Stage V / EPA Tier 4 Compliant
• Turbocharged
• DOC+DPF+SCR Exhaust After Treatment
• Automatic Fuel Bleed System
• Double Element Air Cleaner
• Active Power Control
• High Capacity Fuel Tank
• Engine Safety Start System on Right Console
• Engine Auto Stop
• Parking Brake
• Idle Up in Cold Weather
• High-Capacity Radiator, Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
• Engine Preheat
• Engine Block Heater (cab only)

Operator Station

• ROPS/FOPS (Level I, TOP Guard Level II on high flow)
• Tilt Up Operator’s Station
• Deluxe High Back Adjustable Suspension Seat
• 12V Power Outlet
• 2’’ Retractable Seat Belt
• Radio with Bluetooth (cab only)
• Heat & Air Conditioner (cab only)
• Joystick Pattern Change (ISO or H)
• Foot throttle (Accel./Decel.)
• Pressurized Cab with Roll-up Door, Defrost and Front Wiper
• Polycarbonate Door (high flow only)

Electrical

• 8” Touchscreen Multi-Informational Display
• Rubberized Weatherproof Push Buttons
• 12-volt System with 80 amp Alternator
• LED Light Package; 2 Forward
• Backup Alarm & Horn
• 14-Pin Connector
• 14-Pin Detent
• Rearview Camera
• 270° Rearview Camera (standard on high flow, optional on standard flow)
• Steering Drift Adjustment
• Travel Joystick Sensitivity Adjustment
• Passcode Keyless Push-Button Start

Undercarriage And Frame

• Double Flanged Front and Rear Idlers
• 2-Speed Travel
• High Torque Planetary Final Drive
• 17.7” Rubber Crawlers
• Creep Mode
• Slip Detection
• Speed-Sensitive Ride Control (standard on high flow, optional on standard flow)
• Automatic Transmission
• Permanently Sealed Track Rollers with Metal Face Seals
• Fully Welded Frame with Integrated Cross Members
• Grease Type Track Adjuster
• Rear Bumper Integrated into Frame
• Front and Rear Tie-Down & Lift Points

Hydraulic And Working Equipment

• Electric-Over-Hydraulic (EH) Joystick Controls
• Radial Lift Arm Design
• Arm Height Limit (optional)
• Self-Leveling Up (standard)
• Self-Leveling Down (optional)
• Arm & Bucket Return to Position (optional)
• Loader Joystick Sensitivity Adjustment
• Arm Float
• Proportional Auxiliary Controls with Detent
• Pressure Relieving Flat Face Coupler Body
• Hydraulic Quick Coupler (cab standard)
• Steel Hydraulic Tank with Fluid Sight Gauge
• Air Breather & Filter in Hydraulic Tank
• High Flow Auxiliary Hydraulics (optional)
• Secondary Auxiliary Circuit (standard with high flow only)

Takeuchi Fleet Management

• 5-Year Standard Service
• Minimize Downtime
• Remote Diagnostics
• Utilization Tracking
• Proactive Maintenance
• Control Costs
• Geofencing
• Similar models may be shown in addition to the featured model. Equipment may be shown with options.

General

• Year: 2026
• Manufacturer: TAKEUCHI
• Model: TL11R3
• Condition: New

Exterior

• ROPS Type: Enclosed

Other

• Operating Performance Operating Weight Canopy: 11,650 lb (5,285 kg)
• Operating Performance Operating Weight Cab: 11,980 lb (5,435 kg)
• Operating Performance Tipping Load: 7,825 lb (3,550 kg)
• Operating Performance Rated Operating Capacity, SAE J818*:
• Operating Performance Rated Operating Capacity (ISO 14397 1) @ 35%*: 2,735 lb (1,240 kg)
• Operating Performance Operating Capacity W/ Opt Counterweight: 3,165 lb (1,435 kg)
• Operating Performance ROC W/ Optional Counter Weight:
• Operating Performance Operating Load At 50% Of Tipping Load: 3,913 lb (1,775 kg)
• Operating Performance Bucket Breakout Force: 7,958 lb (3,610 kg)
• Operating Performance Lift Arm Breakout Force: 7,126 lb (3,232 kg)
• Operating Performance Traction Force: 13,196 lb (5,986 kg)
• Operating Performance Ground Pressure 15.7 In. Track:
• Operating Performance Ground Pressure 12.6 In. Track:
• Operating Performance Ground Pressure Canopy: 4.71 psi (32.5 kPa)
• Operating Performance Ground Pressure Cab: 4.84 psi (33.4 kPa)
• Operating Performance Ground Pressure:
• Operating Performance Travel Speed Low: 4.8 mph (7.8 km/h)
• Operating Performance Travel Speed High: 7.5 mph (12.0 km/h)
• Operating Performance Note: *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
• Hydraulic System Auxiliary Flow Primary Circuit: 23.1 gpm (87.6 L/min)
• Hydraulic System Auxiliary Flow Secondary Circuit (optional): 23.1 gpm (87.6 L/min)
• Hydraulic System Auxiliary Flow High Flow (optional): 40.5 gpm (153.4 L/min)
• Hydraulic System Hydraulic System Pressure: 3,480.9 psi (24 MPa)
• Engine Make / Model: Kubota / V3800-TIE5B
• Engine Engine Displacement: 230 cu in (3.8 L)
• Engine Horsepower @ 2,700 Rpm:
• Engine Horsepower @ 2,600 Rpm: 107.3 hp (80 kW)
• Engine Horsepower @ 2,400 Rpm:
• Engine Maximum Torque @ 1,500 Rpm: 271.4 ft-lb (368 Nm)
• Fluid Capacities Engine Lubrication: 14 qt (13.2 L)
• Fluid Capacities Cooling System: 16.9 qt (16 L)
• Fluid Capacities Fuel Tank Capacity: 33.4 gal (126.5 L)
• Fluid Capacities Hydraulic Reservoir Capacity: 15.6 gal (58.9 L)
• Fluid Capacities Hydraulic System Capacity: 22.2 gal (84 L)
• Fluid Capacities DEF Fluid Tank Capacity: 4.8 gal (18 L)
• Fluid Capacities Fuel Consumption (65% Of Full Load): 3.9 gal/h (14.8 L/h)
• Fluid Capacities Diesel Exhaust Fluid (DEF):
• Machine Dimensions Overall Operating Height: 13 ft 11.1 in (4,245 mm)
• Machine Dimensions Max. Lift Height To Bucket Pin: 10 ft 6.0 in (3,200 mm)
• Machine Dimensions Dump Height Fully Raised: 7 ft 11.3 in (2,420 mm)
• Machine Dimensions Dump Reach Fully Raised: 2 ft 11.2 in (895 mm)
• Machine Dimensions Dump Angle: 40°
• Machine Dimensions Rollback Angle: 30°
• Machine Dimensions Track Ground Contact Length: 5 ft 2.8 in (1,595 mm)
• Machine Dimensions Machine Length: 9 ft 11.3 in (3,030 mm)
• Machine Dimensions Transport Length: 12 ft 8.6 in (3,875 mm)
• Machine Dimensions Transport Height: 7 ft 7.7 in (2,330 mm)
• Machine Dimensions Departure Angle: 29°
• Machine Dimensions Clearance Circle With Bucket: 8 ft 0.8 in (2,460 mm)
• Machine Dimensions Clearance Circle Without Bucket: 4 ft 10.6 in (1,490 mm)
• Machine Dimensions Clearance Circle Rear: 5 ft 10.2 in (1,785 mm)
• Machine Dimensions Track Width: 17.7 in (450 mm)
• Machine Dimensions Ground Clearance: 12.4 in (315 mm)
• Machine Dimensions Overall Width Without Bucket: 6 ft (1,830 mm)
• Machine Dimensions Mid Height Reach:
• Machine Dimensions Max. Mid Height Reach: